AGFA DX-D 600 User Manual page 139

6.9.2 MOBILE OVERHEAD PATIENT SUPPORT
Illustration 6-15
Mobile Overhead Patient Support
Holder Support
0242F EN 20181218
This optional patient support can tilt down to allow a more ergonomic position
of the patient. It is provided with one support (optionally two) installed at the
back of the DR Detector, provided with two Locking Pins for its use. It can
support a maximum load of 15 kg.
The Support is already factory installed when required by the customer and can
be installed at both sides of the DR Detector.
To install it:
1. Pull out the Parking Locking Pin at the center of the Support.
2. Install the Support in the working position.
3. Place the Pin in the locking position.
Patient Holder
Parking Locking Pin
Tilting Locking Pin
DX-D 600
User Manual
131