AGFA DX-D 600 User Manual page 124

DX-D 600
User Manual
116
To move the Holder in order to place it in its working or parking position, proceed
as indicated below:
1. Unlock all wheels.
2. Drive the Holder holding the vertical bar and carry it where corresponds.
DRIVE THE HOLDER WITH SPECIAL CARE. AVOID ANY
IMPACT WITH WALLS, FURNITURE OR OTHER ELEMENTS
IN THE ROOM THAT MAY CAUSE DAMAGE TO THE UNIT
AND/OR THE OTHER ROOM ELEMENTS.
DRIVE THE UNIT IN FLAT SURFACES. IF IT IS NOT
POSSIBLE, TRAVEL SURFACES SHOULD NOT EXCEED 5
INCLINATION RAMPS, EXCEEDING THIS ANGLE COULD
CAUSE SERIOUS DAMAGE TO THE UNIT, AND BY USING IT
UNDER THESE
REPRESENT A DANGER FOR THE USER.
HOLD ALLWAYS SECURELY THE VERTICAL BAR TO DRIVE
CORRECTLY THIS HOLDER.
Try not to step over any possible obstacle when moving the
holder, the unit could fall over.
CONDITIONS COULD
o
EVENTUALLY
0242F EN 20181218