AGFA DX-D 600 User Manual page 107

Illustration 4-31
Position Message for Semi-automatic System
0242F EN 20181218
1. Select one of
INCREASE/DECREASE
Description and ID Number are displayed.
2. In case the Programmed Position (PP) involves any movement in the
Longitudinal, Transverse, Alpha and Beta Axes, it must be completed
manually before executing the Auto-position. Press the AUTO-CENTER
Indicator of the Control Console, a message will be displayed in the
console explaining the corrective action to be completed. It is also
indicated first the Current Position and the Final Position.
Corrective Movement
3. Press the VALIDATE PP Button to activate the Programmed Position.
4. Press and hold the AUTO-CENTER Button of the Automatic Positioning
Control Box or Remote Control, if available, to get the Ceiling
Suspension on the configured position.
5. Once the new position is reached the AUTO-CENTER Indicator of the
Control Console lights up.
the Programmed Positions
Buttons. All
Direction
DX-D 600
User Manual
(PP), use
parameters values,
Current Position
Final Position
the
the
99