AGFA DX-D 600 User Manual page 65

SECTION 4
Illustration 4-1
Ceiling Suspension Nomenclature
Longitudinal Rails
Hose
0242F EN 20181218
CEILING SUSPENSION OPERATION
L-block
RAIL SYSTEM
The Rail System is formed by two pairs of rails made of aluminum and available
in different lengths (refer to Section 1.2). The rails allow the displacement of the
Carriage along the Longitudinal and Transverse Axis.
Longitudinal Rails or Axis (X), different lengths extrusion bars which fix the
Ceiling Suspension to the ceiling. They are marked with green color strips to
match the Brakes Buttons of the Control Console.
Transverse Rails or Axis (Y), an horizontal structure fixed to the Longitudinal
Rails by two bearings assemblies that allow the movement along the
Longitudinal Rails. The bearings maintain also the alignment of the Transverse
Rails with the RAD Table. They are marked with orange color strips to match
the Brakes Buttons of the Control Console.
The system may be provided with a Cable Support Rail, an unistrut rail with the
same length of the Longitudinal Rails, located behind the back Longitudinal
Rail.
Carriage
Telescopic Column
Emergency-OFF Switch (Automatic Model)
Control Console
Collimator
DX-D 600
User Manual
Transverse Rails
57