Protection Against Electric Shock Hazards; Protection Against Harmful Ingress Of Water Or Particular Matter; Protection Against Hazards Of Ignition Of Flammable Anaesthetic Mixtures; Protection Against Hazards From Unwanted Or Excessive Radiation - AGFA DX-D 600 User Manual

DX-D 600
User Manual
2.7.4

PROTECTION AGAINST ELECTRIC SHOCK HAZARDS

2.7.5

PROTECTION AGAINST HARMFUL INGRESS OF WATER OR PARTICULAR MATTER

2.7.6 PROTECTION AGAINST HAZARDS OF IGNITION OF FLAMMABLE ANAESTHETIC
MIXTURES
2.7.7

PROTECTION AGAINST HAZARDS FROM UNWANTED OR EXCESSIVE RADIATION

26
Protection against electric shock hazards in accordance with Standards:
IEC 60601-1:1988,
60601-2-54:2009 and 2015.
This equipment has been classified as a type-B ( ) device, in accordance with
Standard IEC 60601-1 requirements. Class I - - Type B applied parts.
TO AVOID THE RISK OF ELECTRIC SHOCK, THIS
EQUIPMENT MUST ONLY BE CONNECTED TO A SUPPLY
MAINS WITH PROTECTIVE EARTH.
ACCORDING TO MDD/93/42/CEE, THIS UNIT IS EQUIPPED
WITH EMC FILTERS. THE LACK OF PROPER GROUNDING
MAY PRODUCE ELECTRICAL SHOCK TO THE USER.
Protection against harmful ingress of water or particulate matter: Ordinary
(IPx0), in accordance with Standard IEC 60601-1:1988, 2005 and 2012.
Degree of Safety in the presence of Flammable Anesthetics Mixture with air or
with oxygen or with nitrous oxide: Not suitable for use in the presence of
Flammable Anesthetics Mixture with air or with oxygen or with nitrous oxide, in
accordance with Standard IEC 60601-1:1988, 2005 and 2012.
Protection against hazards from unwanted or excessive radiation in
accordance with Standard IEC 60601-1:1988, 2005 and 2012, and
IEC 60601-1-3:1994, 2008 and 2013.
2005 and 2012, IEC 60601-2-7:1998,
0242F EN 20181218
IEC