AGFA DX-D 600 User Manual page 131

6.3 TILTING
Illustration 6-4
Potential Pinch Points
0242F EN 20181218
NEVER PLACE THE PATIENT'S AND/OR OPERATOR'S
HANDS OR FINGERS INSIDE THE TILTING ASSEMBLY AS
SHOWN BELOW: IT MAY CAUSE SERIOUS INJURIES TO
PATIENT OR OPERATOR. MAKE SURE THAT THE PATIENT
EXTREMITIES
ACCESSORIES LIMITS DURING OPERATION: MOVEMENT
OF PARTS MAY CAUSE SERIOUS DAMAGES TO PATIENT.
The DR Detector position is locked using:
The Tilting Brakes. There are two Tilting Brake Control buttons, one at

each lateral DR Detector Support. Press and hold any of them to release
the Tilting Brake. The DR Detector is locked at any angle between -20
o
and 90 .
o o
The 0 /90 Detents, located on the DR Detector Support left side. These

mechanical detents lock the DR Detector at 0
(horizontal position).
The DR Detector allows a tilting range from -20
manually controlled.
ARE INSIDE THE
DX-D 600
User Manual
TABLETOP OR
o
(vertical position) or 90
o o
to 90 . The movement is
o
o
123