AGFA DX-D 600 User Manual page 138

DX-D 600
User Manual
6.9 ACCESSORIES
6.9.1 OVERHEAD HANDS SUPPORT
Illustration 6-13
Overhead Hands Support
Illustration 6-14
Working and Parking Position
Working Position
130
The RAD Wall Stand DR is provided with two different models of overhead
patient support, both are used for a correct positioning of patients. The patient
can hold on to it to separate the arms from the chest, so it is highly
recommended for thorax.
This accessory is provided with two locking knobs that must be placed at each
lateral of the DR Detector Support. It can support a maximum load of 15 kg.
It can be installed at both sides of the DR Detector. To install it:
1. Loosen the locking knob.
2. Install the Overhead Arm Support in the holder.
3. Fix it with the locking knob.
The Support can be used in two different positions: Working position, at 0
o o
Parking, at +90 or -90
of the DR Detector loading configuration.
. When parked it must be always rotated to the opposite
Parking Position
o
, and
0242F EN 20181218