7700 MultiFrame Manual
7700SID(-AM) Source Identification Decoder
3.5.
AUDIO BAR GRAPHS
Number of Graphs: 4 (1 group)
Ballistics:
AES/EBU
Attack Time:
1 audio sample
Decay Time:
1.5s for 20dB
Signal Range:
60dB (0dB FS to –60dB FS)
Error Range:
0dB FS to –6dB FS
Warning Range:
-6dB FS to –20dB FS
3.6.
GENERAL PURPOSE IN/OUT
Number of Inputs:
2 (behavior is assigned via. OSD menu items)
Number of Outputs: 2 (GPO 1: Aux bit from VITC SID, GPO 2: Active when video or audio is absent)
Type:
Opto-isolated, active low with internal pull-ups to +5V
Connector:
Female High Density DB-15
Signal Level:
+5V nominal
3.7.
ELECTRICAL
Voltage:
+ 12VDC
Power:
9 Watts.
EMI/RFI:
Complies with FCC Part 15, class A and EU EMC directive.
4.
STATUS LED'S
4.1.
MODULE STATUS LEDS
MODULE STATUS:
LOCAL FAULT:
SIGNAL PRESENT:
AUDIO PRESENT:
7700SID(-AM)-6
This Green LED will be On when the module is operating properly.
This Red LED will be On when there is a fault in the module power supply or
general error conditions exist.
This Green LED will be On when there is a valid signal present at the module
SDI input.
Active when selected Audio Group is detected by the De-embedder.
Revision 0.3