Status Leds - evertz 7700 Manual

Sdi electrical to optical converter, 19.4mb/s or 143-540mb/s

Hide thumbs Also See for 7700:

Table of Contents

Laser Safety:

Class 1 laser product

Complies with 24 CFR 1040.10 and 1040.11

IEC 60825-1

EMI/RFI:

EU EMC directive

STATUS LEDS

MODULE OK

This Green LED will be On when the module is operating properly

LOCAL FAULT

This Red LED will be On when the cable length warning is active or when there is a

fault in the module power supply.

CARRIER PRESENT: This Green LED will be On when there is a valid signal present at the module

input.

CABLE LENGTH WARNING: This Yellow LED will be On when the cable equalizer detects that the cable

length is greater than a preset threshold. (factory set for 250 meters of Belden 8281

or equivalent cable). See section 5.3 for information on adjusting the cable

equalizer warning threshold.

7705EO SDI Electrical to Optical Converter, 19.4Mb/s or 143-540Mb/s

Complies with FCC Part 15, Class A

Revision 1.8

7700 MultiFrame Manual

7705EO - 7

Table of Contents

7705eo