Table of Contents
Advertisement
4.
STATUS LEDS
ACTIVE SIGNAL:
This Green LED will be On when there is a valid signal present at the module input.
NO CARRIER:
This Red LED will be On when there is no valid signal present at the module input.
SIGNAL WEAK:
This Yellow LED will be On when the optical receiver detects that the received
optical power is less than a preset threshold.
POWER
This Green LED will be On when there is power to the unit.
2405OE-HD SMPTE 292M Re-Clocking Fiber to Electrical Converter
Revision 1.2
2400 Series Fiber Converter Manual
2405OE-HD-5
Advertisement
Table of Contents
