Electrical; Physical; Status Leds; Jumpers And User Adjustments - evertz 7700 Manual

3.4.

ELECTRICAL

Voltage:
Power:
EMI/RFI:
3.5.

PHYSICAL

7700 or 7701 frame mounting:
Number of slots: 1
4.

STATUS LEDS

MODULE OK
LOCAL FAULT
CARRIER PRESENT: This Green LED will be On when there is a valid signal present at the module
CABLE LENGTH WARNING: This Yellow LED will be On when the cable equalizer detects that the cable
5.

JUMPERS AND USER ADJUSTMENTS

LOCAL FAULT / MODULE OK
CARRIER PRESENT
CABLE LENGTH WARNING

Figure 4: Jumper Locations for Rev A and Rev 1 DA Cards

7705EO-HD SMPTE292M Re-Clocking Electrical to Fiber Converter
+ 12VDC
6 Watts.
Complies with FCC regulations for class A devices.
Complies with EU EMC directive.
This Green LED will be On when the module is operating properly
This Red LED will be On when input video is lost or when there is a fault in the
module power supply.
input.
length is greater than a preset threshold. (factory set for 125 meters of Belden 1694
or equivalent cable). See section 5.3 for information on adjusting the cable
equalizer warning threshold.
EVERTZ (A) 7700DA-HD
J20
SFF POWER
Revision 1.7
7700 MultiFrame Manual
J8
J9
+12V
7705EO-HD-5