Check Tyres - Linde E12 Operating Instructions Manual

Check tyres

Operate parking brake
The truck must be secured so that it cannot roll
away.
Place chock under wheel not to be lifted.
Raise truck with jack until wheels are off the
ground.
Place pieces of timber underneath.
Check for free movement of wheels and
remove anything hindering their movement.
Replace worn or damaged tyres.
Pneumatic tyres
NOTE
Pneumatic tyres are special equipment.
CAUTION
If the pressure is too low, this will reduce the life of
the tyre and impair the stability of the truck.
The specified tyre pressure should always be
checked regularly.
Check tyres for specified tyre pressure.
If necessary, adjust tyre pressure according
to data.
Operating Instructions – 386 807 1001 EN – 03/2006
Truck with turntable axle
E 12
E 14
E 15
E 16
Truck with combi-steering axle
E 16 P
Tyres made of solid material
The trucks are generally equipped with tyres
made of solid material, so-called superelastic
tyres (SE).
NOTE
The individual tyre types and sizes can also be
found in the data sheets (section 6 Technical
data).
e3861316
Truck with turntable axle
E 12
E 14
E 15
E 16 Flat design
E 16
High design
E 18
Truck with combi-steering axle
E 16 P
E 18 P
E 20 P
Servicing
Checks prior to starting work
front: 18x7-8
(16PR)
rear: 15x4 1/2-8
(12PR)
front: 18x7-8
(16PR)
rear: 16x6-8
(10PR)
front: 18x7-8 SE
rear: 15x4 1/2-8 SE
front: 18x7-8 SE
rear: 16x6-8 SE
front: 200/50-10 SE
rear: 140/55-9 SE
front: 18x7-8 SE
rear: 16x6-8 SE
front: 200/50-10 SE
rear: 16x6-8 SE
5
10 bar
10 bar
10 bar
8 bar
89