Check Braking System - Linde E12 Operating Instructions Manual

5
Servicing
Checks prior to starting work

Check braking system

Check hydraulic operating brake / Stop
pedal
DANGER
A defective braking system presents a major risk to
the driver and all other people.
Check truck for proper braking whenever starting
up. Should faults occur, contact your authorised
dealer at once.
Press Stop pedal (2) with foot.
The truck should immediately come to a stop
when the Stop pedal is pressed.
Check parking brake
DANGER
Insufficient braking action of parking brake, e.g.
due to improper adjustment of brake cable.
The parking brake and Stop pedal must always
function perfectly. Should you notice any defects ,
contact your authorised dealer at once.
Turn the hand brake lever (1) on the steer-
ing column clockwise through 90 degrees.
The parking brake is applied and the truck
should be braked.
Check electric motor brake (LBC)
Release the accelerator pedal (1) or (3)
while in motion.
The accelerator pedal automatically returns
to the zero position, and the LBC electronics
brake the vehicle until it comes to a stop.
NOTE
If wished, this function can be switched off
via a diagnostic software program. Should
the motor brake be switched off, this must be
indicated by an adhesive label clearly affixed
to the truck.
88
3
1
3
Operating Instructions – 386 807 1001 EN – 03/2006
2 1
e3861361
1 2
e3861393