4
Operation
Standard equipment
Sit down on the driver's seat (only then is
the seat switch under the driver's seat acti-
vated).
Affix the seat belt.
Pull the emergency cut-off knob (3).
Insert the switch key (2) in the key switch
and turn clockwise as far as it will go.
Symbol (11) flashes, and the operating hours
meter (13) is in service.
The battery discharge indicator (10) and all
control lights on the indicator unit (7) light up.
(Control lights are extinguished after approx.
4 sec., apart from symbol light (12)).
NOTE
The operating lever (joystick) and/or accelera-
tor pedals should not be used until the control
lights( except for 12 are extinguished). Other-
wise the vehicle will not function. To restart:
switch off and on again at switch.
Slightly raise fork arms and tilt lift mast back.
Release the handle of the parking brake (1)
by pressing the button on the locking handle
and turn anticlockwise. Control light (12) is
extinguished.
Forwards motion
Carefully press right accelerator pedal (4).
Control light (8) lights up.
The driving speed of the forklift truck increases
the further the pedal is pressed down.
34
1
5
Operating Instructions – 386 807 1001 EN – 03/2006
2
3
4
e3861360