Connect Battery To External Charger - Linde E12 Operating Instructions Manual

5
Servicing
Inspection and maintenance as required

Connect battery to external charger

CAUTION
Chargers with a charging current exceeding 160 A
will damage the battery plug irreparably.
The charger used to recharge the battery should
not exceed a charging current of 160 A.
If the charger available exceeds this current, please
contact your authorised dealer .
Fully lower fork carriage.
The fork arms must touch the ground.
Turn the parking brake (1) clockwise
through 90 degrees.
Open battery cover and flap back.
Remove battery plug (5) from socket (4).
Connect connector plug of charger to bat-
tery plug (5).
Switch on charger.
92
5
Operating Instructions – 386 807 1001 EN – 03/2006
1 2
e3861358
4
e3861341