Inspection And Maintenance Overview Programme; General - Linde E12 Operating Instructions Manual

5
Servicing

Inspection and maintenance overview programme

Inspection and maintenance overview programme

General

Your forklift truck will only remain in a state
ready for use at all times if you perform a small
number of maintenance and inspection tasks
according to the information in the registration
document for the industrial truck and the
data or instructions in the operating manual
at regular intervals . Servicing should only
be carried out by qualified staff authorised
by Linde. You can agree performance of this
work on the basis of a maintenance agreement
concluded with your authorised Linde dealer.
If you wish to perform this work yourself, we
recommend at least having the first 3 customer
service checks carried out by the dealer's ser-
vice technician in the presence of your work-
shop representative so your own workshop
staff can be instructed accordingly.
Whenever performing maintenance, the
forklift truck should be parked on a flat surface
and secured so that it cannot roll away. The
motor should be switched off and the switch
key removed.
For work performed with the fork carriage
and/or lift mast lifted they must be secured to
prevent them from accidentally sinking down.
Whenever performing work, the forklift truck
should be parked on a flat surface and secured
so that it cannot roll away.
For work performed with the fork carriage and
lift mast lifted they must be secured to prevent
them from accidentally sinking down.
Whenever work is carried out at the front of the
forklift truck, the lift mast must be secured to
prevent tilting back.
No modifications, in particular attachment or
conversion, should be made to your forklift
truck without the manufacturer's approval.
All servicing work should be followed by a
functional check and a trial run performed on
the forklift truck.
76
WARNING
Any side doors attached could fall shut during
maintenance and trap staff.
For this reason, both doors should be opened and
secured in place during servicing.
CAUTION
The forklift truck must always display the proper
signs/labels/plates.
Missing or damaged rating plates and/or adhesive
labels must be replaced. Warehouse or order No.
see spare parts list.
ENVIRONMENT NOTE
Take note of information about working
materials.
NOTE
When using forklift trucks under extreme
conditions (e.g. extreme heat or cold, high
levels of dust etc.), the time periods given in
the maintenance overview programme should
be reduced accordingly.
Maintenance intervals
Under certain conditions there is the option
of changing the intervals for some of the
maintenance work listed in the maintenance
overview programme. Please make sure
you use the working materials specified
for this purpose. The qualities required
in this regard are described in the section
Recommendations for working materials. The
inspection and maintenance intervals depend
on the operating and service conditions of the
forklift truck. For heavy-duty conditions we
recommend shorter intervals. Please contact
your authorised dealer.
Operating Instructions – 386 807 1001 EN – 03/2006