Symbols Used; Technical Description - Linde E12 Operating Instructions Manual

Symbols used

The precautions WARNING, CAUTION, AT-
TENTION, NOTE and ENVIRONMENTAL
NOTE in this manual are provided to indicate
special hazards or unusual information requir-
ing special identification:
DANGER
indicates hazards that may result in personal injury
or death and/or substantial damage to the product.
WARNING
indicates hazards that may result in personal injury
and/or substantial damage to the product.
CAUTION
indicates hazards that may result in damage to or
destruction of the product.

Technical description

The electric forklift trucks in the series 386 al-
low loading and palletising to be performed for
loads up to 1.2 t with E 12, 1.4 t with E 14, 1.5 t
with E 15, 1.6 t with E 16, 1.8 t with E 18 and
2.0 t with E 20 . An open frame, a driver's
compartment designed according to the lat-
est ergonomic aspects and the energy-saving
digital control system (LDC) included as stan-
dard ensure that this forklift truck is a valuable
piece of equipment. It is characterised by
compact design, good visibility, maximum
stability against overturning and cornering
stability thanks to its variable wheel base.
The electric forklift truck is available with two
different steering axle designs:
Turntable axle
Type E 12, E 14, E 15, E 16 , E 18
Combi-steering axle
Type E 16, E 18, E 20
Operating Instructions – 386 807 1001 EN – 03/2006
NOTE
Identifies technical information requiring
special attention because the connection may
not even be obvious to skilled personnel.
ENVIRONMENT NOTE
The information contained herein must be
observed, otherwise environmental damage
may occur.
CAUTION
This label is affixed on the truck at
the places needing your special
attention.
Read the related material in this
manual.
For your safety other symbols are also used.
Please note the different symbols.
With the turntable axle steering results in an
especially low level of energy consumption
and tyre wear due to the reciprocal rolling
action of the two rear double wheels . The
forklift truck has an extremely small turning
circle and is also suitable for work in confined
spaces thanks to its manoeuvrability and small
aisle width .
The combi-steering axle ensures a large
movement path for the steering axle, good
ground contact and reliable handling both
inside and outside even when used on inferior
road surfaces. The forklift truck is equipped
with an electric traction drive and a hydraulic
pump motor for the steering and operating
hydraulics.
Drive
Front-wheel drive via two electric drive motors
combined on one compact axle with automatic
corner shift, which drive the right and left-hand
drive wheel via the respective wheel gear.
Introduction
Technical description
1
3