Check Operating And Steering Hydraulics For Leakage; Inspection And Maintenance Every 3000 Operating Hours Or Every 2 Years - Linde E12 Operating Instructions Manual

5
Servicing

Inspection and maintenance every 3000 operating hours or every 2 years

Check operating and steering hy-
draulics for leakage
Remove rubber mat from floor plate.
Unscrew 2 screws (1) on side of driver's
seat.
Lift up floor plate (2) and attach with loop (4)
to adjusting knob (5).
NOTE
Should it be necessary to completely disman-
tle the floor plate (2) , all 4 fastening screws
must be unscrewed and the connector plug (3)
detached from the drive control pedal system.
Check hydraulic pump of operating and
steering hydraulics, valves and lines for
leakage.
Replace porous hoses.
Check lines for scuffing and replace if nec-
essary.
120 Operating Instructions – 386 807 1001 EN – 03/2006
e3861392