Linde E12 Operating Instructions Manual page 138

5
Servicing
Inspection and maintenance every 3000 operating hours or every 2 years
Undo screw (1) and remove it together with
washer (2).
Visually check the spring elements for
cracks.
The rubber must not exhibit any cracks.
Check the spring elements for each tilt cylin-
der at the front and rear.
If the rubber bearings are worn or damaged,
renew them. Please advise your authorised
dealer.
Refit the screw and washer.
Tighten the screw to 275 Nm.
128 Operating Instructions – 386 807 1001 EN – 03/2006