Join chain over cross traverse of outer mast
(1) and under cross traverse of inner mast
(2).
Lower lift mast to end of chain.
Lower fork carriage as far as it will go.
Triplex lift mast
FUNCTION: The fork carriage is lifted to the
special free lift height via the chain deflection
pulley of the centre cylinder. Two lift cylinders
then lift the inner mast. Once the inner mast
is fully extended, two additional lift cylinders
lift the centre mast, which is lifted together
with the inner mast and the fork carriage . The
centre cylinder is positioned on the extendable
inner mast.
Secure lifted triplex lift mast
DANGER
Check chain load!
Select safety chain with sufficient load bearing ca-
pacity for the lift mast. Take maximum lift height
into account.
Extend lift mast.
Join chain over cross traverse of outer mast
(1) and under cross traverse of centre mast
(2).
Lower lift mast to end of chain.
Lower fork carriage as far as it will go.
Operating Instructions – 386 807 1001 EN – 03/2006
Inspection and maintenance overview programme
1
2
1
Servicing
2
5
d3921483
d3921484
79