Linde E12 Operating Instructions Manual page 37

Adjust lumbar support
Move the rotary knob (6) to the left or right to
adjust the lumbar support as required .
NOTE
Take note of the symbol label affixed to the
rear of the seat back.
Switch on seat heater (special equip-
ment)
Operating switch (7) will switch on the heat-
ing of the driver's seat.
Adjust armrest driver's seat
NOTE
The armrest on the driver's seat is automati-
cally pushed up by spring pressure after the
locking screw (1) is released.
Sit down on the driver's seat and release
the locking screw (1) .
Push the armrest (3) down against the
spring pressure until a comfortable posi-
tion for the arm is found.
Tighten locking screw (1) .
Release the locking screw (2) and move the
armrest (3) backwards or forwards until the
operating levers (4) are easily accessible.
Tighten locking screw (2).
Operating Instructions – 386 807 1001 EN – 03/2006
Standard equipment
7
6
3
2
1
4
Operation
6
e3861328
4
e3861304
27