Driving without lift mast
CAUTION
When driving without the lift mast the speed of the
forklift truck has to be reduced for safety reasons.
For this reason two additional stop screws have to
be fitted for speed restriction under the forwards
and backwards accelerator pedal (two-pedal ope-
ration) or one stop screw under the forwards ac-
celerator pedal (single-pedal operation) before
removing the lift mast.
Switch off vehicle.
Press emergency cut-off knob.
Screw hexagonal head bolt M10 x 40 (3)
halfway into tall hexagonal nut M10 (2)
(DIN 6330, 6331, 6334).
Screw hexagonal nut (2) onto existing
hexagonal head bolt M10 (1) until hexago-
nal head bolt (3) touches hexagonal head
bolt (1).
Lock hexagonal nut (2).
Remove lift mast.
After refitting the lift mast the additional stop
should be removed.
Operating Instructions – 386 807 1001 EN – 03/2006
3
2
1
d3921520
4
Operation
Loading / Transport
71