Check Secure Fastening, Condition And Function Of Lift Mast, Lift Mast Chains, Lift Cylinders And End Stops; Check The Tilt Cylinder Bearings For Wear - Linde E12 Operating Instructions Manual

Inspection and maintenance every 3000 operating hours or every 2 years
Check secure fastening, condition
and function of lift mast, lift mast
chains, lift cylinders and end stops
Clean lift mast guides and chain.
Check chain for condition and wear, espe-
cially at deflection pulleys .
Check secure fastening of chain to chain
anchor.
Replace damaged chains.
NOTE
Individual plastic links that are damaged or
missing do not impair function or service life.
Check the condition and secure fastening
of the lift mast, guide surfaces and pul-
leys/rollers.
Check the condition, secure fastening and
function of the end stops.
Check the secure fastening of the lift cylin-
ders.
Check the secure positioning of the lock ring
of the piston rod fastening to the lift mast at
the top .
Check the tilt cylinder bearings for
wear
NOTE
The tilt cylinders are attached on both sides in
spring elements.
Operating Instructions – 386 807 1001 EN – 03/2006
5
Servicing
e3861311
127