Linde E12 Operating Instructions Manual page 32

3
Overview
Indicator unit
(20)LCD display
(21) Symbol parking brake activated
The parking brake symbol is switched on as
soon as the parking brake is activated.
(22)Display operating hours
Shows the operating hours of the forklift truck.
This indicator is proof of the operating time of
the forklift truck as well as the inspection and
maintenance work to be performed.
NOTE
If a defective indicator unit is replaced, the op-
erating hours accumulated must be recorded.
Note data on an embossed strip affixed near
the indicator unit. There is also the option of
subsequently updating the new indicator unit.
Please contact your authorised dealer.
(23)Symbol operating hours until next service
After the key switch has been switched on,
display field (22) shows the operating hours
until the next service (counting backwards).
Symbol (23) lights up. After 5 seconds symbol
(23) is extinguished and indicator (22) auto-
matically switches to the operating hours of
the forklift truck and the operating hours sym-
bol (15) flashes.
22
(24)Lift mast position identification (special
equipment)
Lights up when permissible tilt angle is ex-
ceeded.
(25)Text field error code, lift height, steering
position indicator
Serves as a display field. To read out error
codes please contact your authorised dealer.
(26)Neutral warning light (colour yellow)
without function
(27)Indicator light motor temperature raised
(colour yellow)
Lights up when the temperature of a motor is
raised.
(28)Indicator light battery charger operation
(colour yellow)
The yellow indicator light is activated by the
charger when the vehicle battery is being
charged.
(29)Indicator light battery charging via inte-
grated charger finished (colour green)
The green indicator light is activated by the
charger when battery charging has finished.
Operating Instructions – 386 807 1001 EN – 03/2006