Check Wheel Gear For Leaks; Double Hoses: Check Pretension - Linde E12 Operating Instructions Manual

Inspection and maintenance every 3000 operating hours or every 2 years

Check wheel gear for leaks

Raise the forklift truck with the jack at the
front on the left and/or right.
Place pieces of timber underneath.
Check the wheel gear for leaks on the right
and left depending on the version at the
filling / checking screw and drain plug as
well as at the housing flange.
Please contact your authorised dealer in
the event of any leakage.
Double hoses:
Check pretension
NOTE
For vehicles with the standard lift mast and
additional hydraulics attached the pretension
of the double hoses must be checked.
Pretensioning of the double hoses should be
5-10 mm per metre, based on the initial length.
Adjust the pretension by sliding the hoses
in the retaining clips to the measurement
specified .
Operating Instructions – 386 807 1001 EN – 03/2006
5
Servicing
e3861301
e3861340
131