Linde E12 Operating Instructions Manual page 45

NOTE
Pressing down the accelerator pedal hard is
to no advantage as the maximum acceleration
rate is controlled automatically.
Reverse motion
Carefully press left accelerator pedal (5).
Control light (9) lights up.
The forklift truck will reverse back slowly or
quickly depending on the position of the accel-
erator pedal .
Changing direction
Release accelerator pedal pressed.
Press the accelerator pedal for the opposite
direction of travel.
The forklift truck will be electrically braked
until stationary and then accelerated in the
direction specified.
Both feet should be left on the accelerator
pedals so that the forklift truck is easily con-
trolled in every driving movement.
Operating Instructions – 386 807 1001 EN – 03/2006
Operation
Standard equipment
35
4