Lifting System And Attachments (Central Lever Operation) - Linde E12 Operating Instructions Manual

4
Operation
Standard equipment
Lifting system and attachments (cen-
tral lever operation)
WARNING
With the moving lift mast or any attachment there is
a risk of the driver getting caught in between.
Therefore never reach or step into the lift mast or
the space between the lift mast and the vehicle. The
lifting system and attachments should only ever be
used for their proper purpose. Bear the maximum
lift height in mind. Drivers must be instructed in the
handling of the lifting system and attachments .
NOTE
With the central lever version, use of the oper-
ating lever in an intermediate position (approx.
45°) will activate both functions at the same
time (e.g. lifting and tilting).
Take note of the switching symbols with
arrows.
The operating lever should always be oper-
ated carefully, never jerkily. The excursion of
the operating lever determines the lifting, low-
ering and tilt speed . After the operating lever
is released, it automatically returns to its initial
position.
NOTE
The lifting system and attachments only func-
tion with the forklift truck switched on and the
driver's seat under load.
44 Operating Instructions – 386 807 1001 EN – 03/2006
d3931329