Functional Check Of Cross Fan And Drive Axle Fan - Linde E12 Operating Instructions Manual

5
Servicing
Inspection and maintenance every 500 to 1000 operating hours or once a year
Check that the hexagon-headed screws (1)
and (2) are tight.
Check that the extension springs (3) are
correctly seated.
Check the tension of the guide rollers (5) by
pressing on lever (4) in the direction of the
arrow.
Front face of lift mast
Check guard (6) for damage.
Check the hexagon-headed screws (8) on
the guard (6) for tightness.
Check both the lift mast cross strut stops.
Check that the guide rollers (5) and (7) run
freely.
Oil the guide roller bearings.
Functional check of cross fan and
drive axle fan
Function
The vehicle has four fans in total. On the drive
axle there are three fans to cool both power
sections. On the front right side of the vehicle
there is a fan that conveys hot air outside from
the motor compartment .
116 Operating Instructions – 386 807 1001 EN – 03/2006