Linde E12 Operating Instructions Manual page 57

Take note of the switching symbols with
arrows.
The operating lever should always be oper-
ated carefully, never jerkily. The excursion of
the operating lever determines the lifting, low-
ering and tilt speed . After the operating lever
is released, it automatically returns to its initial
position.
NOTE
The lifting system and attachments only func-
tion with the motor running and the driver's
seat under load.
Lift fork carriage
DANGER
When lifting the lift mast there is an increased risk
of falling and crushing.
For this reason it is not permitted to step onto the
fork arms when lifted without a protective cage .
Pull back operating lever (1).
Lower fork carriage
Move operating lever (1) forwards.
Tilt lift mast forwards
Move operating lever (2) forwards.
Tilt lift mast backwards
Pull back operating lever (2).
Operate attachments
The forklift truck is equipped with three addi-
tional functions (e.g. fork adjustment, rotating
unit, sideshift etc.). Take note of the operating
pressure and operating manual for the attach-
ment. Two other operating levers are then
attached for operation . Operating lever (5) is
used to operate two attachments, which are
controlled via toggle switch (4).
Operating Instructions – 386 807 1001 EN – 03/2006
Operation
Standard equipment
2
1
4
3 4
e3861348
47