Takeover Of Forklift Truck - Linde E12 Operating Instructions Manual

Takeover of forklift truck

Before the forklift truck leaves our works, it is
subject to a careful inspection to ensure that it
is in perfect condition and is received by you
complete with all equipment according to your
order. Your authorised dealer is also obliged
to perform another inspection and proper
handover.
To avoid subsequent complaints please be
so kind as to carefully check the condition
of the forklift truck and the completeness of
the equipment yourself and to confirm proper
handover/takeover vis-à-vis your authorised
dealer.
Linde is constantly engaged in the further
development of its products . We ask for
your understanding that figures/diagrams
and technical data are subject to technical
modification in terms of form, equipment and
know-how in the interest of progress.
For this reason no claims can be asserted
on the basis of the following data, figures/di-
agrams and descriptions in this operating
manual .
Please address all queries and orders for
spare parts relating to your forklift truck only to
your authorised dealer , stating your mailing
address.
In the event of repairs only use genuine Linde
spare parts. This is the only way to guarantee
that your forklift truck remains in the same
technical state as at the time of takeover.
This operating manual must not be repro-
duced, translated or made accessible to third
parties - including as excerpts - except with the
express written approval of the manufacturer .
With orders for parts please specify the
following along with the parts numbers:
Forklift truck type:
Production number /
Year of manufacture
Operating Instructions – 386 807 1001 EN – 03/2006
Takeover of forklift truck
For parts from the units: motor, lift mast,
variable hydraulic pump and drive axle the
production number of these units should also
be specified.
Lift mast number
Lift mast lift height
When taking over the forklift truck, this data
should be copied from the rating plates of the
units into this operating manual.
NOTE
For forklift trucks which leave our works
without a lift mast an additional stop screw
for speed restriction can be found under
the forwards/reversing accelerator pedal
(two-pedal operation) or accelerator pedal
(one-pedal operation . These have to be
removed after attaching the lift mast. To do so,
release hexagonal head screws and unscrew
along with hexagonal nuts (see also Driving
without lift mast).
Each forklift truck includes the following
technical documentation:
• operating manual for forklift truck
• EC Declaration of Conformity (manufac-
turer confirms that industrial truck complies
with requirements of EC Machinery Direc-
tive.)
• Regulations for proper usage of industrial
trucks according to their intended purpose
(VDMA - German Engineering Federation)
• Registration document for the industrial
truck, provided on handover by your autho-
rised dealer.
1
Introduction
5