In The Case Of Tip-Over; Handling Fluids And Lubricants - Linde E12 Operating Instructions Manual

WARNING
The fork lift truck working area must be adequately
lit.
If it is insufficiently lit, floodlights must be installed
to ensure that the driver can see properly.

In the case of tip-over

• Stay buckled up
• Don't jump
• Hold on tight
• Brace feet
• Lean away

Handling fluids and lubricants

ENVIRONMENT NOTE
Always handle fluids and lubricants as re-
quired and as specified by the manufacturer.
• Only store fluids and lubricants in approved
containers at specified storage places.
• As they could be inflammable, do not allow
contact with hot objects or a naked flame.
• Only use clean containers when replenish-
ing fluids and lubricants.
• Follow the manufacturer's safety and
disposal instructions.
• Do not spill fluids.
• Remove any spillage immediately with a
suitable binding agent and dispose of as
specified.
• Also dispose of used or contaminated fuels
and lubricants as specified.
Operating Instructions – 386 807 1001 EN – 03/2006
Handling fluids and lubricants
The stability of your truck is ensured if used
properly and as intended. Should the truck
tip over during an unapproved application or
due to incorrect operation, always follow the
instructions depicted below.
• Follow laws and regulations.
• Clean the area surrounding the part in
question before lubrication, filter renewal
or repairs in the hydraulic system.
• Discard replaced parts in a way friendly to
the environment.
WARNING
Do not allow hydraulic oil under pressure, for
example at a leak, to penetrate the skin. Medical
aid is required if such an injury occurs.
Wear protective gear.
WARNING
Improper handling of coolants and coolant additives
puts your health and the environment at risk.
Observe manufacturer´s directions.
2
Safety
9