Check Condition Of Anti-Static Belt; Change Breather - Linde E12 Operating Instructions Manual

Inspection and maintenance every 3000 operating hours or every 2 years

Check condition of anti-static belt

Check the secure positioning of the anti-
static belt on the floor of the frame and ex-
amine for wear.
Replace the anti-static belt if damaged.
NOTE
The anti-static belt must always be in contact
with the floor.

Change breather

NOTE
With high levels of dust it may be necessary to
change the filter earlier.
Screw breather (1)with oil dipstick (2) out of
filler neck.
Remove dipstick (2) from breather (1) and
fit new breather.
Screw breather back into filler neck.
Operating Instructions – 386 807 1001 EN – 03/2006
5
Servicing
121