4
Operation
Standard equipment
Draw seat belt (3) from retractor on the left
without jerking .
Position belt over lap, not over stomach.
Allow buckle (2) to snap into place in catch
lock of belt (4).
Check seat belt tension.
Belt must fit close to the body.
Open seat belt
Press red button (5) on catch lock (4).
Move buckle (2) with hand back to belt re-
tractor (1).
NOTE
The automatic blocking mechanism may be
triggered if the belt runs in too fast when the
buckle strikes the housing. The belt cannot be
pulled out with the normal force .
30
5
4
Operating Instructions – 386 807 1001 EN – 03/2006
1
2
3
e3861327