4
Operation
Special equipment
= problem with steering
5
= damage (accident)
6
= user-defined
7
= user-defined
8
= user-defined
9
The state messages
individually by the user. Please contact your
fleet manager to find out about definition of
these state messages.
NOTE
If you do not notice one of these states (e.g.
problem with driving) until after you have
logged on with the state code
you will have to log off again.
Turn the rotary button (in place of key
switch) anticlockwise as far as it will go.
Log back on with state message
with driving).
Forklift Data Acquisition - standard set-
ting (PIN number and state code)
Log on and start vehicle:
Operate parking brake.
60
,
,
can be defined
7
8
9
(vehicle OK) ,
0
(problem
3
Operating Instructions – 386 807 1001 EN – 03/2006