Adjust Lift Mast Chain - Linde E12 Operating Instructions Manual

5
Servicing
Inspection and maintenance every 500 to 1000 operating hours or once a year

Adjust lift mast chain

Standard lift mast
NOTE
The lift mast chain stretches over time during
operation and therefore has to be readjusted.
Vehicles equipped with the standard mast
have 2 lift chains. With suspension on two
chains check for even chain length.
Tilt lift mast right back and fully lower.
Release counter nut (1)
Adjust chain at adjusting nut (2) of chain
anchor.
The lower guide roller of the fork carriage
should only protrude max. 25 mm from the
guide rail of the internal lift mast .
Tighten counter nut (1) securely.
Also adjust second chain.
CAUTION
When extended, the lift mast should not touch the
end stops.
Fully extend lift mast and check clearance to end
stops.
NOTE
Reseal adjusting and counter nuts.
Apply chain spray.
NOTE
In the case of forklift trucks which are used in
the food production sector chain spray should
not be used but a low-viscosity oil licensed for
use in the food industry .
Apply Linde chain spray to guide surfaces
and chain.
114 Operating Instructions – 386 807 1001 EN – 03/2006
2
1
e3861333