Information On Specific Lift Products; Cal40 - Linak Inline LA20 User Manual

9. Information on specific LIFT products

1. CAL40 (MEDLINE CARELINE
®
Usage
• With internal charger:
• Duty cycle:
• Operating temperature:
• Storage temperature:
• Relative humidity:
• Atmospheric pressure:
• Meters above sea level:
• Approvals:
Instructions for use
• Default functionality – when charging, the LIFT40 will not be able to operate any actuators
• It is only possible to use the battery BAL40 with either of the CAL40 control boxes
• Use only original LINAK mains cables to ensure proper connection to internal charger
)
®
Nominal current draw max . 350 mA (depending on input voltage)
Standby power of 230 VAC = 0 .7 W (depending on input voltage)
Improved BLE might give lower power consumption
Input voltage range: 120-240 VAC (50/60 Hz)
Power consumption (charging): max . 30 W (depending on input voltage)
Max . 10%, 2 minutes continuous use followed by 18 minutes without use
+5 °C to +40 °C
-10 °C to +50 °C
20% to 80% - non-condensing
700 to 1060 hPa
Max . 3000 meters

CAL40

EN IEC 60601-1
ANSI/AAMI ES60601-1
CAN/CSA-C22 .2 NO . 60601-1
EN IEC 60601-1-2
CAL40+
EN IEC 60601-1
ANSI/AAMI ES60601-1
CAN/CSA-C22 .2 NO . 60601-1
EN IEC 60601-1-2
RED (EU) (pending)
FCC ID (US) (pending)
IC ID (Canada) (pending)
Telec (Japan) (pending)
The control box CAL40 is part of the LIFT40 product series specially
developed for patient lifts .
LIFT40 is a complete system consisting of the control box CAL40 or
CAL40+, a battery BAL40 and an external charger CHL40 in a flexible
solution . Combined with one or more actuators and a hand control you
have a complete system for modern patient lifts .
Page 265 of 295