The FPP is intended for mounting at the head end of a bed in order for the patient to be able to see and operate it with an easy push of a button . After

use, it can easily be moved a short distance aside .

The FPP comes with a cable attached . The bottom part of the arm is prepared for mounting inside a bracket - fitting the diameter of the arm .

The bracket is not supplied by LINAK but must be designed and manufactured by the customer . It must fit the dimensions shown . A suggestion to

a design and dimensions of the fixation parts are shown below:

Dimensions lIllustration:

The FPP must be mounted in such a manner that it is secured against rotation . For this purpose the bracket end of the arm has 4 drilled holes - one of

the 4 holes must be secured via the bracket with a slotted set screw with cone point (pointed screw) .

Otherwise it may slide away from the user when operated .

Recommendations

• The application manufacturer must ensure a proper installation of the FPP in the application which is convenient for the end user .

• To ensure proper activation, the lock above the housing must be properly locked by turning it clockwise .

• The application manufacturer must use the correct torque for the slotted set screw of the bracket to ensure a stable positioning of the FPP .

• The application manufacturer must consider the bracket position carefully . If the FPP is mounted on a moveable part, it will move and might touch the

patient or parts of the application . If, however, mounted on a fixed part, the FPP might not be within the reach of the patient .

• The end user must not apply a torque to the FPP housing of more than 8 Nm between the flexible arm and the panel .

• The end user must not bend the FPP arm to a radius smaller than 105 mm .

• The FPP must never be used as a handle for moving the application .

• The end user must be informed that the FPP must not be used for other purposes (such as table, handle) than intended .

• The end user must take care that the FPP does not touch items or persons when the application is moved .

Warnings

• The FPP must be placed readily accessible for the patient . Never let the FPP hand out of the bed .

• Never use the FPP as a handle .

• Do not use sharp devices to activate buttons on the FPP .

• Never use the FPP as support device . The FPP must not be used as table or notepad, nor can it be used to hang objects on .

)