Ba19 Lead Acid - Linak Inline LA20 User Manual

3. BA19 Lead acid (MEDLINE
Usage
• Compatibility:
• Duty cycle:
• Charging:
• Charging time:
• Recharging during storage:
• Operating temperature:
• Storage temperature:
• Relative humidity:
• Atmospheric pressure:
• Height above sea level:
• Service:
• Approvals (pending):
LED functionality:
What does the LED indicate?
Buzzer functionality:
The buzzer will make a warning when a button on the hand control is pressed and the battery capacity is low .
The buzzer can also be activated by the control box to signal other conditions . This must be specified in the control box software .
Mounting instructions:
CARELINE )
® ®
Battery backup for CA/CO control box platform
10%, 2 minutes continuous use followed by 18 minutes not in use
Via integrated charger
Approx . 6 hours
Battery recharging no later than 6 months after production date stated on the label
+ 5 °C to + 40 °C
- 5 °C to + 40 °C
The batteries must be stored in an applicable storage room to avoid direct sunlight
20% to 80% - non-condensing
700 to 1060 hPa (3000 m)
Max . 3000 meters
Battery cells cannot be replaced as the battery cover cannot be closed properly afterwards
IEC60601-1:2005 3 edition,
rd
ANSI/AAMI ES60601-1: 2005, 3
CAN/CSA-22 .2 No . 60601-1:2008
BA19 must be mounted with attachment
screw and mounting bracket (see below)
due to the battery weight .
Screw M4 countersunk torque
1 .1 Nm +/- 0 .1 Nm .
45°
d
k
k
d M4
d 8 .4
k
k 2 .7
According to ISO 2009
The BA19 lead acid backup battery has been developed specifically for
use with the new control boxes CA30/CA40 and CO61 . It is a compact
and cost-efficient battery with built-in charger and cable management .
rd edition
LED Indication of operation
Solid orange Charging (battery not ready)
No LED light Fully charged (battery ready)
Flashing yellow Error during charging
Mounting bracket (frame flat) - article no . 1015W1001:
d
Page 210 of 295