Information On Specific Controls; Abl - Linak Inline LA20 User Manual

6. Information on specific controls

1. ABL (MEDLINE CARELINE
®
This device complies with Part 15 of the FCC Rules .
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation .
Connectors on PCBA
Top side
J2
Pin
3 (input)
4 (input)
5 (input)
6 (input)
7 (input)
8 (input)
9 (input)
10 (input)
Bottom side
J3
Pin
2 (input)
3 (input)
4 (output)
Voltage between this pin and pin 1 is
5 (output)
equal to supply voltage on J1 when
6 (output)
7 (output)
)
®
With the small ABL print it is possible to convert analogue input to Bluetooth Low Energy .
The ABL print can be used as attendant control or hand control integrated in side rails in for instance
healthcare applications and offers easy access to different positioning functions .
Usage
• Operation temperature:
• Storage temperature:
• Compatibility:
• Relative humidity:
• Atmospheric pressure:
• Meters above sea level:
• Approvals:
J1
Connection
Active when connected to
pin 2 (GND)
Connection
Active when connected to
pin 8 (GND)
LED is active
+5 °C to +40 °C
-10 °C to +50 °C
Compatible with LINAK Bluetooth Low Energy (BLE) control boxes .
Please contact LINAK .
20% to 80% – non-condensing
700 to 1060 hPa
Max . 3000 meters
IEC60601-1
ANSI/AAMI ES60601-1
CAN/CSA-22 .2 No 60601-1
J2
Pin 10
Pin 1
Bluetooth Low Energy command (V0/V1/V2)
I0/I10/I20
I1/I11/I21
I2/I12/I22
I3/I13/I23
I4/I14/I24
I5/I15/I25
I6/I16/I26
I7/I17/I27
J3
Pin 8
Pin 1
Bluetooth Low Energy command (V0/V1/V2)
I8/I18/I28
I9/I19/I29
LED1/LED11/LED21
LED2/LED12/LED22
LED3/LED13/LED23
LED4/LED14/LED24
Page 180 of 295