regular operations like hi/lo and trend/anti-trend . Use the magnet key to operate the next level, care mode, where it is possible to lock functions .

The LEDs show which functions are locked and which are not .

Magnet key - article no . 0858008

Warning

• Do not sit or lie on the hand control . It can cause unintended movement of the bed .

• Inform the customer that after loss of mains power, the lock state is reset to the default setting . Be aware of a special setup for a magnet lock of

low power system in case of power down on mains . Also be aware that the lock is reset when running on battery or when powered down .

• Inform the customer that using the magnet key cannot wake up a low power system or a system running on battery . The system will wake up when

activating a key and then the magnet key can unlock the system .

• Inform the customer that a powerful magnetic field may change the lock state .

• Always use O-rings on connectors and cable locks .

• There is a risk that items with internal magnet for mounting instead of hook can disturb function of cardiac pacemaker, implantable cardioverter

defibrillators or magnetic implants! .

Recommendations

• Inform the customer to use only the magnet key supplied by LINAK . We also recommended to make a functional test of the application before putting it

into operation .

• Clean the hand control regularly to ensure good hygiene standards .

• When replacing a defective HD80, check that the new HD80 has exactly the same specification and functionality .

• Do not submerge the hand control under water .

• Unless otherwise specified or agreed by LINAK, the hand control is only intended to be used on LINAK systems .

• When changing hand controls for OpenBus™, the power must be switched off .

• It is recommended to check the hand control and cable for damage and holes made by violent handling before washing the bed or at least once a year .

• In order to maintain the flexibility of the cables, it is important that a coiled cable is placed in such a way that the cable's own weight does not strain the

coil during the washing process .

For hand controls with magnets:

• If hand controls with magnets are hooked on a smooth surface, a movement or twisting of the cable, for example during transport, can cause the hand

control to move and result in damage if the cable gets squeezed somewhere .

• The force of the magnet depends on the thickness of the lacquering, the lacquering type, stickers, steel thickness etc . It is the responsibility of the

customer to verify that the holding force on the application is acceptable .

• It is the responsibility of the user/operator to evaluate any possible risk caused by use of magnets .

• It is recommended to have a parking place for the hand control on the application where the customer ensures that the hand control does not fall off .

)

The HD80 makes it possible to have two hand controls in one unit . The hand control

is equipped with a magnet locking function, making it possible to have two levels of

operation – one for the patient and relatives and one for the caregiver staff . The HD80

provides a great overview using LED indication of functions being locked or unlocked .

The hand control is designed to work with OpenBus™ systems .

Usage

• Usage temperature:

• Storage temperature:

• Compatibility:

• Relative humidity:

• Atmospheric pressure: