Bal40 - Linak Inline LA20 User Manual

2. BAL40 (MEDLINE CARELINE
®
Usage
• Compatibility:
• Duty cycle:
• Charging:
• Recharging during storage: First battery recharge must be no later than 6 months after the production date stated on the label .
• Operating temperature:
• Charging temperature:
• Storage temperature:
• Relative humidity:
• Atmospheric pressure 700 to 1060 hPa
• Meters above sea level:
• Approvals:
General functionality – LIFT40
Taking off battery:
1) Lift handle upwards to release lock
2) Grab handle, pull out and slightly to the right
3) Lift off the battery - carry in handle
Open up
1
)
®
CAL40/CAL40+/CHL40
Max . 10% or 2 minutes continuous use followed by 18 minutes without use at a max . discharge current of 10 A
Via external wall charger CHL40 and CH01 or via CAL40 or CAL40+ with internal charger .
Hereafter, the battery must be recharged at least every 6 months .
+5 °C to +40 °C
+5 °C to +40 °C
Charging at high ambient temperatures can impact the charging time .
-15 °C to +40 °C (+10 °C to +25 °C - recommended)
The batteries must be stored in an applicable storage room without direct sunlight .
20% - 80% – non-condensing
Max . 3000 meters
IEC 60601-1
ANSI/AAMI ES60601-1
CSA CAN/CSA-C22 .2 NO . 60601-1
IEC 60601-2
Grab handle
2
Page 276 of 295
The BAL40 lead acid
battery pack is part of
the LIFT40 product series
specially developed for
patient lifts .
Lift off
3