Disposal Of Linak's Products; Main Groups Of Disposal; Disposal Of Batteries - Linak HOMELINE LA18 IC Standard Series User Manual

Disposal of LINAK products
As LINAK customers often ask us how our products can be disposed of or scrapped, we have prepared this guidance that
enables a classification to different waste fractions for recycling or combustion.
Guidance
We recommend our products be disassembled as much as possible and divided into different waste groups for recycling or
combustion.
For example, waste can be sorted into metals, plastics, cable scrap, combustible material and recoverable resources.
Some of these main groups can be further divided into subgroups; e.g. metal can be divided into steel/aluminium/copper and
plastic can be divided into ABS/PA/PE/PP.
As an example, the table below breaks down the different components in LINAK products to various recycling groups:
Product
Column/ Actuator :
Control Box :
Handset/Control :
By now, almost all our casted plastic parts are supplied with an interior code for plastic types and fibre contents, if any.

Main groups of disposal

Product main groups
LA18 IC Standard Master
LA18 IC Standard Follower
SMPS001 / 002 / 006
Hand controls
LED Light Rail

Disposal of batteries

Details regarding safe disposal of used and leaking batteries:
Batteries should be disposed in accordance with appropriate federal, state and local regulations. LINAK recommends that
used or leaking batteries are disposed through local recycling system. Please do not throw used or leaking batteries in normal
household waste or in nature. This will cause damage to the enviroment.
How to deal with leaking batteries
Leaking batteries should be disposed as described above.
If leaking batteries are discovered in the product, the batteries must be removed at once to minimise damage to the product. If
leaking batteries are left in the product, it become defective.
It is recommended to use plastic gloves when handling leaking batteries. The contents of a leaking batteries can cause chemi-
cal burns and respiratory irritation.
If exposed to the contents of a leaking battery, please wash with soap and water. If irritation persists, please seek medical
attention. In case of eye contact, please flush eyes thoroughly with water for 15 minutes and seek medical attention.
Components
Spindle and motor
Plastic housing
Cable
PC boards
PC boards
Plastic housing
Cable
Transformer
Plastic housing
Cable
PC boards
Metal Cable
scrap scrap
X X
X X
X
X
Recycling group
Metal scrap
Plastic recycling or combustion
Cable scrap or combustion
Electronics scrap
Electronics scrap
Plastic recycling or combustion
Cable scrap or combustion
Metal scrap
Plastic recycling or combustion
Cable scrap or combustion
Electronics scrap
Electronics
scrap
X
X
X
X
X
Page 15 of 26
Plastic recycling or
combustion
X
X
X
X
X
Comments