La30 - Linak Inline LA20 User Manual

9. LA30 (MEDLINE CARELINE
®
Recommendations
LINAK control boxes are designed so that they will short-circuit the motor terminals (poles) of the actuator(s), when the actuator(s) are not running . This
solution gives the actuator(s) a higher self-locking ability . If the actuator(s) are not connected to a LINAK control box the terminals of the motor must
be short-circuited to achieve the self-locking ability of the actuator .
Improved self-locking ability
When using the LA30 with stereo jack plug be aware of the reversed direction of travel as standard .
The current supply to LINAK actuators must be cut off in case of overload when the actuators reach end position .
Various other information:
Noise levels:
LA30: dB(A) 50; LA30S: dB (A) 55; LA30L: dB(A) 48 .
Measuring method DS/EN ISO 3743-1, actuator not loaded .
LA30 Actuator with potentiometer
Red / Yellow
Green / White
+
TECHLINE )
® ®
The H-bridge ensures that the motor is shorted when the relays are incactive .
This is necessary to improve the self-locking of the actuator .
+
Out going
In going
+
The LA30 is a powerful actuator yet small enough to fit most applications .
The actuator can be supplied with options such as built-in potentiometer for servo opera-
tion or an extra powerful motor for increased speed and strength (S-motor) .
In addition to industrial and agricultural applications, the actuator is also ideal for position-
ing satellite dishes .
Usage
• Duty cycle: 10 %, 2 minutes continuous use followed by 18 minutes not in use
• Ambient temperature: + 5 °C to + 40 °C
• Storage temperature: - 40 °C to + 70 °C
• Compatible with LINAK control boxes . Please contact LINAK .
• Approvals: IEC 60601-1, ANSI/AAMI ES60601-1 and CAN/CSA-22 .2 No 60601-1
LA30 Actuator with reed (only possible with 24V L-motor)
3 .9 k
Pulse
Please note that the voltage level og feedback signal depends on the
actuator load .
Page 59 of 295
Brown Black
Out going
+
+
In going