Cb8A; Cb8-T; Cb9 Homeline - Linak Inline LA20 User Manual

7. CB8A (MEDLINE CARELINE
®
Usage
• Duty cycle:
• Ambient temperatures:
• Approvals:
Recommendations
• Note: max . accumulated power consumption is 10 Amp .
• The measurement is individual for each channel, but if the total current consumption reaches 10 Amp, the CB cuts off the current . The CB and the
actuator are therefore protected via a common measurement .
• External Charger CH01 has to be ordered separately . By use of charger CH01 it is possible to activate the actuators when charging . However, this is
not recommended as it can damage the control box or the charger CH01 .
• Battery kit BA0801 has to be ordered separately for versions M, G, H, Q, R (2 channel) and version M (3 channel) .
• When using the CB8A with emergency stop button, the stop button must be released before charging batteries .
• Acoustic alarm sounds when batteries are low and recharging should be started . The alarm level corresponds to approx . 17-18 VDC .
• If the CB800XXXXN-X0 option is chosen, an external emergency stop device (NC) or short-circuiting connection must be mounted in channel 3,
before connection to allow proper function and battery charging .
Important: Individual current cut-off:
The current to each actuator is monitored and when this reaches a specified value, the current
to that actuator is cut-off .
As the actuators do not have the same current consumption the cut-off values must also be
different . Therefore it must be specified which actuator is to be connected to which channel:
8. CB8-T (MEDLINE CARELINE
®
Important: Individual current cut-off:
The current to each actuator is monitored and when this reaches a specified value, the current to
that actuator is cut-off .
As the actuators do not have the same current consumption the cut-off values must also be different .
Therefore it must be specified which actuator is to be connected to which channel:
9. CB9 (HOMELINE )
®
TECHLINE )
® ®
Max . 5% or 3 min . in use followed by 57 min . not in use
o o
+ 5 C to +40 C
IEC60601-1:2005 3 edition approved ANSI/AAMI, ES60601-1:2005 3
rd
TECHLINE )
® ®
The CB9 has been developed for Home use . The CB9 and the LA31 can be fully integrated, which saves
mounting and wiring or be installed separately .
The HOMELINE CB9 series is available as either analogue (Ax) or μ-processor based (Px) types .
The CB8A is a battery powered control box operating up to 3 actuators
individually . One of these channels can be used either as an external
emergency stop device or for battery charging .
Simple design and high quality construction make the CB8A an ideal control
box choice for mains-free operation of beds, chairs, tables and many other
mobile applications .
The CB8-T is developed for use with LINAK A/S' actuators and handsets .
The control box can operate up to 2 actuators individually .
The simple compact design combined with high quality makes the control
box ideal for use with beds, chairs, tables and many other applications .
Page 137 of 295
edition approved .
rd
CURRENT CUT-OFF (A)
2 A (2 .35 +/- 0 .35 Amp)
3 A (3 .00 +/- 0 .35 Amp)
4 A (4 .00 +/- 0 .50 Amp)
5 A (5 .35 +/- 0 .50 Amp)
6 A (5 .90 +/- 0 .70 Amp)
CURRENT CUT-OFF (A)
2 A (2 .35 +/- 0 .35 Amp .)
3 A (3 .00 +/- 0 .35 Amp .)
4 A (4 .00 +/- 0 .50 Amp .)
5 A (5 .35 +/- 0 .50 Amp .)
6 A (5 .90 +/- 0 .70 Amp .)
Values in brackets
show tolerances .
Values in brackets
show tolerances .