Information On Specific Accessories; Generel Information; Ba16 Lead Acid - Linak Inline LA20 User Manual

8. Information on specific accessories

If the actuator is to be equipped with accessories, these must be specified when ordering the actuator from LINAK . There are the following possibilities:
1) TR6/TR7 External transformer
If the TR6 or TR7 fixed cable connection becomes damaged the transformer must be replaced .
1. BA16 Lead acid (MEDLINE
LED functionality:
Buzzer functionality:
The buzzer will make a warning when a button on the hand control is pressed and the battery capacity is low . The buzzer can also be activated by an
intelligent control box to signal other conditions . This must be specified in the control box software .
CARELINE )
® ®
The battery box BA16 is developed for use together with the LINAK CA and CO control box
series to support power backup .
Usage
• Compatibility: Battery back-up for COxx and CAxx
• Duty cycle: 10%, 2 minutes continuous use followed by 18 minutes not in use
• Charging: Via integrated charger
• Charging time: Approx . 6 hours
• Recharging during storage:
Battery recharging no later than 6 months after production date stated on the label
• Operating temperature: +5 °C to +40 °C
• Storage temperature: -10 °C to +50 °C
The batteries must be stored in an applicable storage room to avoid direct sunlight
• Relative humidity: 20% to 80% - non-condensing
• Atmospheric pressure: 700 to 1060 hPa
• Height above sea level: Max . 3000 meters
• Service: Battery replacement
• Approvals (pending): IEC60601-1, ANSI/AAMI ES60601-1, CAN/CSA-22 .2 No . 60601-1
UL tested in accordance with UL60601-1 (pending)
LED Indication of operation
Solid yellow Charging (battery not ready)
No LED light Fully charged (battery ready)
Flashing yellow Error during charging
Page 207 of 295