Acom; Dph Medical - Linak Inline LA20 User Manual

6. ACOM (MEDLINE CARELINE
®
Recommendations
• Clean the hand control regularly to ensure good hygiene standards .
• When a defective ACOM is replaced, check that the new ACOM has exactly the same specification and functionality .
• Do not submerge the hand control in water .
• Unless otherwise specified or agreed with LINAK, the hand control is only intended to be used for LINAK systems .
• When changing hand controls for OpenBus
• It is recommended to check the hand control and cable for damage and holes caused by violent handling before washing the application or at
least once a year .
• It is recommended to have a parking place for the hand control on the application where the customer ensures that the hand control does not fall off .
Warnings
• Do not sit or lie on the hand control as this can cause unintended movement of the application .
7. DPH Medical (MEDLINE
®
The desk panel control DPH is made especially for the medical segment . It makes it possible to differentiate product design and achieve a more aesthetic
control solution .
The DPH (DPH1K10-210007) works with MJB (MJB5061101-00) and is OpenBus™ compatible .
The DPH (DPH1K10-210008 and DPH1K10-210009) fits directly into the analogue control box (CA30/CA40 or CA63) .
The MJB 000 port repeater version can be used in systems where several DPH controls are needed .
Usage
• Usage temperature:
• Storage temperature:
• Relative humidity:
• Atmospheric pressure:
• Height above sea level:
• Compatibility:
• Modular Junction Box:
• DPH and MJB are approved in accordance with:
Functionality
DPH1K10-210007 combined with MJB5061101-00 creates the OpenBus™ codes:
Up arrow: H0
Down arrow: H1
Wrong mounting is not an issue with the MJB5061101-00 and the modular jack plug of the DPH cable . The plug will only fit into the correct MJB ports .
DPH1K10-210008, analogue (control box channel 1) or
DPH1K10-210009, analogue (control box channel 2)
)
®
systems, the power must be switched off .
TM
CARELINE )
®
+5 °C to +40 °C
-10 °C to 50 °C
20% to 80% - non-condensing
700 to 1060 hPa
Max . 3000 meters
DPH is compatible with analogue or OpenBus™ control boxes
MJB5061101-00 to be used with DPH1K10-210007
or MJB version 000 port repeater to be used with DPH1K10-210008 or DPH1K10-210009
IEC60601-1
ANSI AAMI ES60601-1,
CAN/CSA-22 .2 No 60601-1
ACOM is the obvious control for hospital and nursing home beds where patient
positioning needs careful control by medical staff . ACOM is an OpenBus
control .
Usage
• Operation temperature: +5 °C to + 40 °C
• Storage temperature:
• Relative humidity:
• Atmospheric pressure:
• Height above sea level: Max . 3000 meters
• Approvals:
• Compatibility:
Page 185 of 295
-10 °C to + 50 °C
20% to 80% - non-condensing
700 to 1060 hPa (3000 m)
IEC 60601-1 Edition 3 .1 (2012),
IEC 60601-1-6:2010 + A1:2013
Compatible with LINAK OpenBus
CO-generation
TM
control boxes,
TM