Depending on of what your JUMBO system consists you need to use one of the following three mounting brackets . IP protection is only valid when the
JUMBO system is mounted vertically .
All three brackets include matching screws (IPX1, IPXX and IPX5 are delivered with stainless screws) . The mounting screws for the control box, charger
must be tightened with a maximum torque of 1 Nm .
)
®
MBJ1
For use together with CBJ1 or CBJ2 or CBJC, CHJ2 and BAJ1 or BAJ2 . I . e . when
combining control box, charger and battery pack MBJ1 has to be used .
MBJ2
For use together with CBJ1 or CBJ2 or CBJC, and BAJ1 or BAJ2 . I . e . when
combining control box and battery pack MBJ2 has to be used .
MBJ3
For use together with CHJ2 and BAJ1 or BAJ2 . I . e . when combining charger and