Modular Data Interface - Mdi - Linak Inline LA20 User Manual

15. Modular Data Interface - MDI (MEDLINE
MDI connection
Port 3
Port 2
Port 1
Pin
Pin 1 Vperm (+22-50V)
Pin 2 GND
Pin 3 Wake up
Pin 4 N/A
Pin 5 N/A
Pin 6 Vbus (+8V)
Pin 7 RXD (TXD from LCi Client)
Pin 8 TXD (RXD from LCi Client)
Pin 9 N/A
Pin 10 N/A
CARELINE
®
With the Modular Data Interface, it is possible to connect to third party devices . The
MDI establishes the access to the LINAK
system for the use of future features .
Usage
• Operation temperature:
• Storage temperature:
• Relative humidity:
• Atmospheric pressure
• Meters above sea level:
• Approvals:
UART (to LCi client) - use cable CAB90092
™
Control box connection - use cable CAB0965394
OpenBus/programming
Name
Always powered on battery .
Powered when sustem is active on mains .
GND for minimum 100 ms and maximum 500 ms
to wake up the system or else disconnected .
Powered when system is active .
)
®
(operation and storage):
Description
Page 255 of 295
® Communication Interface
+5 °C to + 40 °C
-10 °C to + 50 °C
20% to 80% - non-condensing
800 to 1060 hPa
Max . 3000 meters
IEC 60601-1
TM and prepares the