Insulation Class; Key To Symbols - Linak Inline LA20 User Manual

Insulation class

LINAK control boxes are available in insulation class 1 and insulation class 2 .
®

Key to symbols

The following symbols are used on the LINAK product labels:
IEC 60417-5172:
Class II equipment
Product with a thermofuse
IEC 60417-5957:
For indoor use only
IEC 60417-5222:
Safety isolating transformer, general
IEC 60417-5840:
Patient part of type B
IEC 60417-5019:
Protective earth; protective ground
IEC 60417-5002:
Positioning of cell
ISO 7000-0434A:
Caution, consult accompanying document
ISO 7000-1641
Operating instructions
Electronics scrap
Electronics scrap
Recycle
Recognised
Component mark for Canada and the United
States
PSE mark
Compliance to all relevant EC directives
China
Pollution control mark (also indicates recyclability)
Regulatory compliance mark:
The Australian Safety/EMC Regulations
Alternating current
Direct current
Reduced ETL recognised component mark for
Canada and the United States .
XXXXXX
X: The mark is always accompanied by a control
number of 6 or 7 figures .
For complete description, see ETL marking on next
page .
Page 18 of 295