Download Print this page

Environmental; Installation; Telecommunications Terminal Equipment Directive; Ce Mark - Comtech EF Data CDM-710 Installation And Operation Manual

Broadcast satellite modem

Advertisement

CDM-710 Broadcast Satellite Modem
Preface

Environmental

The CDM-710 shall not be operated in an environment where the unit is exposed to extremes of
temperature outside the ambient range 0 to 50°C (32° to 122°F), precipitation, condensation, or
humid atmospheres above 95% RH, altitudes (un-pressurized) greater than 2000 meters,
excessive dust or vibration, flammable gases, corrosive or explosive atmospheres.
Operation in vehicles or other transportable installations that are equipped to provide a stable
environment is permitted. If such vehicles do not provide a stable environment, safety of the
equipment to EN60950 may not be guaranteed.

Installation

The installation and connection to the line supply must be made in compliance to local or national
wiring codes and regulations.
The CDM-710 is designed for connection to a power system that has separate ground, line and
neutral conductors. The equipment is not designed for connection to power system that has no
direct connection to ground.
The CDM-710 is shipped with a line inlet cable suitable for use in the country of operation. If it is
necessary to replace this cable, ensure the replacement has an equivalent specification. Examples
of acceptable ratings for the cable include HAR, BASEC and HOXXX-X. Examples of
acceptable connector ratings include VDE, NF-USE, UL, CSA, OVE, CEBEC, NEMKO,
DEMKO, BS1636A, BSI, SETI, IMQ, KEMA-KEUR and SEV.
International Symbols:
Symbol
~

Telecommunications Terminal Equipment Directive

In accordance with the Telecommunications Terminal Equipment Directive 91/263/EEC, this
equipment should not be directly connected to the Public Telecommunications Network.

CE Mark

Comtech EF Data declares that the CDM-710 Broadcast Satellite Modem meets the necessary
requirements for the CE Mark.
International Symbols
Definition
Alternating Current
Fuse
xiv
Symbol
Definition
Protective Earth
Chassis Ground
Revision 9
MN/CDM710.IOM

Advertisement

loading